FilmTec Water Hong Kong Limited
Service Train

Water Treatment and Filtration Services

FilmTec Water Hong Kong Limited builds and maintains six connected service lines that together form a complete treatment train. Each one is engineered for a specific job, and each one can be delivered on its own or as part of a managed programme from our Hung Hom base.

RO Stage S1

Reverse Osmosis Systems

Reverse osmosis is the pressure driven core of most treatment trains we design, rejecting dissolved salts, heavy metals, nitrates and a wide range of organic compounds in a single pass. We analyse the feed water first, then select membrane elements, pressure vessels and pumping arrangements that match the real chemistry rather than a generic specification. Recovery and flux are balanced against scaling risk, and antiscalant dosing is configured only where the saturation indices justify it.

Every system includes permeate and concentrate instrumentation, pressure and flow transmitters, and a clean-in-place connection so membranes can be restored without dismantling the rack. Controls are arranged so that a decline in rejection shows up as a clear trend on the operator display, giving early warning long before product quality drifts out of specification. Where energy cost matters, we integrate energy recovery devices and variable speed pumping to keep the specific power demand of the train under control.

UF Stage S2

Ultrafiltration Plants

Ultrafiltration removes suspended solids, colloids, algae and micro-organisms, producing a consistently low turbidity filtrate that protects everything downstream. Our plants use hollow fibre modules arranged in duty and standby banks, operated through a controlled filtration, backwash and air scour sequence that keeps the fibres clean without aggressive chemical use. Transmembrane pressure is monitored continuously so a developing fouling layer is detected early and addressed with a targeted cleaning cycle.

The modular layout means a single skid can be isolated for maintenance while the rest of the plant keeps producing, which matters on sites that cannot afford to stop supply. We size the membrane area around the peak demand and the worst expected feed quality, not the average, so the plant still performs on the difficult days. Filtrate quality is logged to a data record that feeds directly into the water quality testing programme we run for each client.

WQ Stage S3

Water Quality Testing

Water quality testing is how a treatment train is proven rather than assumed. We collect samples from the feed, from interstage points and from the final product line, then measure the parameters that actually control the process: turbidity, conductivity, pH, total hardness, free and combined chlorine, silica, and microbiological indicators where the application requires them. Each result is tagged to the stage that produced it so the data builds a picture of the whole cascade over time.

Reports are written in plain language. They state the measured values, the trend against previous rounds and the practical meaning for the plant, followed by a clear recommendation on cleaning, media replacement or set point adjustment. Testing can be delivered as a scheduled standalone service for clients who run their own maintenance, or folded into a maintenance contract so the same engineer who adjusts the plant also interprets the numbers.

FM Stage S4

Filter Media Supply

Filter media supply covers the granular and cartridge materials that keep a treatment train effective: filter sand, anthracite, activated carbon, ion exchange resin, and the sediment, carbon and membrane cartridge elements used in smaller systems. We match the media grade and bed depth to the contaminant profile of the site, because a bed sized for iron removal behaves very differently from one sized for chlorine or organics. Media arrives with a certificate of analysis so the client can confirm the material meets the specification.

We also handle the removal and lawful disposal of spent media, which is often the part clients find hardest to manage. Discharge of exhausted resin or loaded carbon is arranged so the site stays compliant, and a written record is provided for the environmental file. Planned media replacement is almost always less expensive than the equipment damage that degraded media causes downstream, so we recommend and schedule it rather than waiting for a failure.

MC Stage S5

System Maintenance Contracts

A maintenance contract places a scheduled engineering rhythm around the whole treatment train. Visits cover cartridge replacement, membrane cleaning, pump and valve inspection, instrument calibration, and a condition assessment of every major asset. Because we hold the design history of the plants we build, our technicians arrive already knowing the duty, the set points and the known weak points, which shortens fault finding and reduces downtime.

Contracts scale to the site. A small commercial unit may need quarterly visits, while a continuous industrial process may need full monthly cover with guaranteed response times and critical spares held on site. Each visit produces a written report covering work completed, measurements taken and items to watch, so the client has a maintenance record that stands up to audit. The goal is straightforward: keep every stage of the cascade performing the way it did on commissioning day.

CD Stage S6

Custom Treatment Design

Custom treatment design is for sites where no standard package will meet the duty. We begin with a full feed analysis and a detailed survey of the plant room, then model the process sequence stage by stage, sizing pumps, vessels, membranes, media beds and controls around the real flow and quality profile. Drawings, a controls philosophy and commissioning criteria are agreed with the client before any fabrication begins, so there are no surprises at handover.

The output is a documented system that operators can run confidently and that future contractors can service without guesswork. We consider maintenance access, redundancy and instrumentation from the first sketch, because a treatment train that cannot be maintained will not stay in specification for long. Where a standard skid can do the job we will say so, but when the water demands a tailored cascade, our engineers design and build it end to end.

How the Six Services Connect

The order matters. Testing reveals what the feed carries, design selects the stages that remove it, media and membranes provide the removal, and maintenance keeps the removal working. Reverse osmosis and ultrafiltration are the workhorses, filter media is the shield in front of them, and custom design ties the whole train together for the site it serves.

Discuss a Service Line with Our Engineers

Whether you need a single reverse osmosis system, a full ultrafiltration plant, scheduled testing or a completely custom treatment train, FilmTec Water Hong Kong Limited can scope it from our Hung Hom office. Call +15677728495 or email billing@poketech.autos to start the conversation.

FLOW-01Request a Survey